All Parts

Search for The Part You Need

Throttle Top Speed Adjustable Limiter with High/Low Speed Switch Connector Use a small screwdriver to adjust the top speed of a throttle. Top speed can be adjusted from around 5-100% and anywhere in between. The connector with orange and black wires can go to a high/low speed selector switch to select between full speed and adjustable low speed. This is an optional connection and the adjuster will work without a switch connected to it. Easy to install - simply plug this speed limiter in...

Throttle Top Speed Adjustable Limiter with Panel Mount Knob for SPD-481000BLDC Controller Compatible with SPD-481000BLDC Controller. Top speed can be adjusted from 0-100% and anywhere in between. Easy to install - simply plug this speed limiter in between the throttle and controller.

Throttle with 60 Volt Battery and Speed Display and Key Switch Warning: We do not have wiring directions available for this throttle so only buy it to replace the exact same throttle with the exact same wire colors and connectors. 7-wire throttle with 60V battery and speed LCD display plus key switch. Known Compatibility: Fits some Fat Tire and Citycoco/Citicoco electric scooters.Fits some eDrift fat tire electric scooters. ...

Half Length Twist Throttle Standard half length throttle. Fits 7/8" (22mm) handlebars. Wire colors: black, red, and green. 62" long throttle cable with 3 pin black throttle to speed controller connector. The most common connector used in conjunction with this throttle is CNX-63. Wiring Directions ...

Throttle with Matching Grip for X-Treme XB-502 and XB-700 Electric Scooter

Thumb Throttle (Left Hand Version) Standard thumb throttle. Designed to be installed on the left hand side of handlebars. Fits 7/8" (22mm) handlebars. Wire colors: black, red, and white. 62" long throttle cable with 2.8mm male terminals. Wiring Directions ...

Thumb Throttle (Right Hand Version) Standard thumb throttle. Designed to be installed on the right hand side of handlebars. Fits 7/8" (22mm) handlebars. Wire colors: black, red, and white. 62" long throttle cable with 2.8mm male terminals. Wiring Directions ...

Thumb Throttle for Ezip, IZIP, and Schwinn 1000 Series Electric Scooters For Ezip, IZIP, and Schwinn 1000 series electric scooters with 5-wire throttles. 64" long throttle cable.

Thumb Throttle for Pukka Electric Mini Bike View All Parts for the Pukka Electric Mini Bike

Razor Thumb ThrottleFits the following models: Dune Buggy Version 1-11E200 and E225 Version 1-4E300 and E325 Version 1Ground Force Version 1-12Ground Force Drifter Version 1-2

Thumb Throttle for Razor Go KartsFits the following Razor models: Dune Buggy Version 12+ Ground Force Version 13+ Ground Force Drifter Version 3+ Ground Force Drifter Fury Version 1+

Thumb Throttle for Razor EcoSmart Metro Electric Scooter With plug-and-play connector for the Razor EcoSmart Metro. Three LED battery battery level indicator.The original throttle uses a half length grip so a new full length grip set such as GRP-18SET should be installed along with this throttle. 

Thumb Throttle for Solar Electric Go Kart

Thumb Throttle Handlebar Grip Handlebar grip without inside flange. For use on the left and right sides of handlebars with thumb throttles. 3-3/4" grip length. Fits 7/8" (22mm) handlebars.

Thumb Throttle Handlebar Grip Handlebar grip without inside flange. For use on the left and right sides of handlebars with thumb throttles. 4-3/8" grip length. Fits 7/8" (22mm) handlebars.

Thumb Throttle with 24 Volt Power Meter Thumb throttle with 24V power meter. Three LED indicator lights. One LED for power on status and the other two for battery pack status. 64" long throttle cable. Red, black, green, and yellow wires with 2.8mm wide male terminals for white wire connectors. (replaces throttles with red, black, white, and blue wires) Wiring Directions ...

Thumb Throttle with 24 Volt Power Meter and Latching On/Off Switch Thumb throttle with 24V power meter and latching red push button on/off switch. Three LED 24 Volt battery pack indicator lights: red for empty, yellow for half and green for full. 64" long throttle cable. Red, green, black, white, yellow, and brown wires with 2.8mm wide male terminals for white wire connectors. Wiring Directions ...

Thumb Throttle with 24 Volt Power Meter and Latching On/Off Switch Thumb throttle with 24V power meter and latching red push button on/off switch. Three LED 24 Volt battery pack indicator lights: red for empty, yellow for half and green for full. 64" long throttle cable. Red, green, black, white, yellow, and brown wires with male connector pins for black wire connectors. Wiring Directions ...

Thumb Throttle with 24 Volt Power Meter and Latching On/Off Switch Thumb throttle with 24V power meter. Three LED 24 Volt battery pack indicator lights: red for empty, yellow for half and green for full. 64" long throttle cable. Red, green, black, white, yellow, and brown wires with female connector pins for black wire connectors. Wiring Directions ...

Thumb Throttle with 24 Volt Power Meter and Latching On/Off Switch Thumb throttle with 24 Volt battery level indicator. Gray latching on/off push button switch. Cable exits back of throttle so throttle can be used on either right side or left side of the handlebars. Three LED battery indicator lights; red for empty, yellow for half, and green for full. 64" long throttle cable. Red, black, green, yellow, brown, and white wires with 2.8mm wide male terminals for white wire connectors. Wiring...

Thumb Throttle with 36 Volt Battery Power Meter Three LED battery power indicator meter. 64" long throttle cable. 2.8mm wide male terminals for white connectors. Wiring Directions

Thumb Throttle with 36 Volt Power Meter and Latching On/Off Switch Maintained push button on/off switch. 64" long cable with 6 wires. 2.8mm male terminals. Three LED indicator lights for 36 Volt battery pack. Wiring Directions

Thumb Throttle with 36 Volt Power Meter and Latching On/Off Switch Thumb throttle with 36 Volt battery level indicator. Gray latching on/off push button switch. Cable exits back of throttle so throttle can be used on either right side or left side of the handlebars. Three LED battery indicator lights; red for empty, yellow for half, and green for full. 64" long throttle cable. Red, black, green, yellow, brown, and white wires with 2.8mm wide male connector pins for white wire connectors....

Thumb Throttle with 36 Volt Power Meter and Latching On/Off Switch

Thumb Throttle with 36 Volt Power Meter and Latching On/Off Switch Maintained push button on/off switch.Three LED 36 Volt battery pack indicator lights: red for empty, yellow for half , and green for full. 64" long throttle cable. Male connector terminals for black wire connectors. Wiring Directions ...

Thumb Throttle with 48 Volt LED Meter and On/Off SwitchThumb throttle with battery battery level indicator. Red latching on/off push button switch. Three 48 Volt battery pack status LED indicator lights: red for empty, yellow for half and green for full. 64" long throttle cable. Red, black, white, green, yellow, and brown wires with 2.8mm wide male connector pins for white wire connectors. Wiring Directions ...

Thumb Throttle with 48 Volt LED Meter and On/Off Switch

Thumb Throttle with 48 Volt LED Meter and On/Off Switch

Thumb Throttle with 48 Volt Battery Power Meter Three LED battery power indicator meter. 64" long throttle cable. 2.8mm wide male terminals for white connectors.

Thumb throttle with 48 Volt battery level indicator. Gray latching on/off push button switch. Cable exits back of throttle so throttle can be used on either right side or left side of the handlebars. Three LED battery indicator lights; red for empty, yellow for half, and green for full. 64" long throttle cable. Red, black, green, yellow, brown, and white wires with 2.8mm wide male connector pins for white wire connectors. Wiring Directions ...

Thumb Throttle with 5-Wire Connector and Power Meter for 24 Volt eZip, IZIP, Schwinn, Mongoose, and GT Electric Scooters

Thumb Throttle with Key Switch and 0-99 Volt Red LED Power Meter Thumb throttle with key switch and 0-99.9 Volt red LED digital battery level indicator. Key is removable in the off position only. 62" long throttle cable. Red, black, green, blue, and yellow wires with 2.8mm male terminals. Fits standard 7/8" (22mm) handlebars. Wiring Directions ...