All Parts

Search for The Part You Need

Speed Controller with 3-Wire Throttle Connector for Currie, Schwinn, GT, and Mongoose Electric Scooters Designed for 24 Volt motors up to 600 Watts. Maximum current 30 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature prevents over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle. For Currie, eZip, IZIP, Schwinn, GT, and...

Speed Controller with 3-Wire Throttle Connector for Currie, Schwinn, GT, and Mongoose Electric Scooters Designed for 24 Volt motors up to 600 Watts. Maximum current 30 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature prevents over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle. For Currie, eZip, IZIP, Schwinn, GT, and...

Speed Pot with Wires and Connector for eWheels EW-36, EW-36 Elite, EW-37, and EW-Vintage Electric Scooters

Battery Charger Port for Mongoose MGX 250 Electric Mini Bike

SpeedometerBlue: + Positive DC (Approximately 2 Volts Per MPH)White: - GroundBattery GaugeRed: + Positive DC (Calibrated for 60 Volt Battery Pack)Black: - Negative

Spindle Arm Set for Razor Dirt Quad Electric ATV (V1+)

Spindle Arm Set for Razor Dune Buggy

Spindle Arms for Razor Dirt Quad 500 Electric ATV Version 1-2 For Razor Dirt Quad 500 only. Does not fit Razor Dirt Quad. Set of left and right spindle arms with hardware. Includes kingpin and kingpin bushings. Compatibility: Razor Dirt Quad 500 Version 1-2 (does not fit version 3 and up)

Spindle Arms for Razor Dirt Quad 500 Electric ATV Version 3+ For Razor Dirt Quad 500 only. Does not fit Razor Dirt Quad. Set of left and right spindle arms with hardware. Includes kingpin and kingpin bushings. Compatibility: Razor Dirt Quad 500 Version 3 and up (does not fit version 1-2)

Spindle Bushings for Razor Dune Buggy If this part is out of stock it can be replaced with RDB-BUSHING-2

Spindle Bushings for Razor Dune Buggy Set of four aftermarket spindle bushings for the Razor Dune Buggy electric go-kart. These aftermarket bushing are longer than the OEM bushings to provide an extended service life.

Steering Spindle Bushings for Razor Ground Force, Ground Force Drifter, and Ground Force Drifter Fury Electric Go Kart

Sprocket Hub for 1" Axles Made from zinc-plated steel.4" OD.3/4" overall width.1" ID bore. 1/4" keyway. Four 3/8" ID holes with 2.875" bolt circle diameter and four 1/4" ID holes with 3.228" bolt circle diameter. Includes two setscrews.Compatible with hardware kit item # HDW-2875-104. Bolt Hole and Collar Dimensions: ...

Sprocket Hub for 1" Axles Compatible with our Group 3 (G3) sprockets.Made from zinc-plated steel.2-1/4" outside diameter.1-1/4" shoulder.1" ID bore. 1/4" keyway. Three 1/4" ID sprocket mounting holes with 1.75" bolt circle diameter (BCD). Sprocket mounting holes are not threaded and work with 1/4" nuts and bolts. Setscrew is on the opposite side of the keyway.Includes one setscrew. ...

Sprocket Hub for 1-1/4" Axles Made from zinc plated steel.4" OD.3/4" overall width.1-1/4" ID bore. 1/4" keyway. Four 3/8" ID holes with 2.875" bolt circle diameter and four 1/4" ID holes with 3.228" bolt circle diameter. Includes two setscrews.Compatible with hardware kit item # HDW-2875-104.

Sprocket Hub for 3/4" Axles Made from zinc plated steel.4" OD.2" neck OD.3/4" overall width.3/4" ID bore.3/16" keyway.Four 3/8" ID holes with 2.875" bolt circle diameter and four 1/4" ID holes with 3.228" bolt circle diameter.Includes two setscrews.Compatible with hardware kit item # HDW-2875-316. ...

Sprocket Hub for 3/4" Axles Compatible with our Group 2 (G2) sprockets.Made from zinc plated steel.2-1/8" outside diameter.3/4" ID bore. 3/16" keyway. Three 1/4" ID sprocket mounting holes with 1.687" bolt circle diameter (BCD). Sprocket mounting holes are not threaded and work with 1/4" nuts and bolts. Setscrew is on opposite side of keyway.Includes one setscrew.

Sprocket Hub for 3/4" Axles Made from zinc plated steel.4" OD.3/4" overall width. 5/8" ID bore.3/16" keyway.Four 3/8" ID holes with 2.875" bolt circle diameter and four 1/4" ID holes with 3.228" bolt circle diameter.Includes two setscrews.Compatible with hardware kit item # HDW-2875-316.

Sprocket Hub for 5/8" Axles Compatible with our Group 2 (G2) sprockets.Made from zinc plated steel.2-1/8" outside diameter.5/8" ID bore. 3/16" keyway. Three 1/4" ID sprocket mounting holes with 1.687" bolt circle diameter (BCD). Sprocket mounting holes are not threaded and work with 1/4" nuts and bolts. Setscrew is on opposite side of keyway.Includes one setscrew.

Sprocket Hub Hardware Kit for 1" and 1-1/4" Axles Four 3/8" OD x 3/4" long socket head bolts with lock nuts. One 1/4" x 1/4" x 3/4" key pin. Compatible with item # HUB-201100 and HUB-201114.

Sprocket Hub Hardware Kit for 5/8" and 3/4" Axles Four 3/8" OD x 3/4" long socket head bolts with lock nuts. One 3/16" x 3/16" x 3/4" key pin. Compatible with axle hubs item # HUB-201058 and HUB-201034.

Sprocket Mounting Bolts and Locknuts for 5-Hole Freewheels Set of five quantity M5x0.8 x 16mm long bolts and five quantity M5x0.8 locknuts.Compatible with 5-hole freewheel item # FWM-205.

Sprocket Spacer Washer for Gear Motors with 11mm Shaft11mm ID x 20mm OD x 1mm ThickMade from Galvanized SteelCommonly used on gear motors with 11mm shafts when replacing a sprocket with a 13.75mm hub width with a sprocket that has a 9mm or 10mm hub width. 

Sprocket to Freewheel Nut and Bolt Set for F8 Mounting Pattern Set of four M8x24mm 8mm bolts and four M8 8mm nylock nuts. Compatible with FWM-164 Rear Axle or Wheel Freewheel Clutch and sprockets with F8 Sprocket Mounting Pattern

Sprocket to Freewheel Nut and Bolt Set Stainless steel bolt and locknut hardware set used for attaching sprockets to freewheel clutches. Includes four bolts and four locknuts.For sprockets and freewheels with the F4 mounting pattern.

12 Volt Square 2-Wire Incandescent and LED Turn Signal Flasher RelayTurn signal flasher relay for electric scooters, bikes, and pocket bikes with 12 Volt lighting systems. Works with Incandescent and LED bulbs.Silent flasher without beeper. 1/4" (6.3mm) wide tab terminals for push-on connectors. Dimensions of flasher are 1-3/8" x 1-3/8" x 1" excluding terminals and mounting tab.

12 Volt Square 2-Wire Incandescent and LED Turn Signal Flasher Relay Turn signal flasher relay for electric scooters, bikes, and pocket bikes with 12 Volt lighting systems. Works with Incandescent and LED bulbs. Built-in beeper sounds when turn signals are blinking. 1/4" (6.3mm) wide tab terminals for push-on terminals or connector. Dimensions of flasher are 1-3/4" x 1-3/8" x 1" excluding terminals and mounting tab. ...

36 Volt Square 2-Wire Incandescent and LED Turn Signal Flasher Relay Turn signal flasher relay for electric scooters, bikes, and pocket bikes with 36 Volt lighting systems. Works with Incandescent and LED bulbs.Silent flasher without beeper.1/4" (6.3mm) wide tab terminals for push-on connectors.Dimensions of flasher are 1-3/8" x 1-3/8" x 1" excluding terminals and mounting tab. ...

Circuit Breaker Cover