All Parts

Search for The Parts That You Need

36V 3W Taillight And Turn Signal Bulb (BLB-363)

36V 500W E-Scooter and E-Bike Speed Controller Designed for 36 Volt motors up to 500 Watts. Maximum current 25 Amps. Under Voltage protection 31 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle. Mounting tabs on back side of controller. Fits many common electric scooter and bicycle models. Item...

36V 500W Electric Scooter Speed Controller Designed for 36 Volt motors up to 500 Watts. Maximum current 25 Amps. Under Voltage protection 31 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle. Item # SPD-36500C Wiring Directions ...

36 Volt 5 Watt Turn Signal or Taillight Bulb 36 Volt, 5 Watt electric scooter and bike headlight bulb. 15mm (approximately 9/16") wide base. Bulb Details and Dimensions

36V 8W Headlight Light Bulb (BLB-368)

37 Tooth Aluminum Sprocket for T8F (8mm) Chain with F4 Mounting Pattern Made from Tempered (Hardened) Aircraft Grade Aluminum Alloy F4 Mounting Pattern37 TeethFor T8F (8mm) Chain54.1mm ID BoreFour 6.2mm ID Bolt Holes @ 90 degrees65mm Bolt Circle Diameter

37 Tooth Sprocket for #41 and #420 Chain Made from Aircraft Grade Tempered (Hardened) Aluminum Alloy For #41 and #420 Chain 37 Teeth F4 Mounting Pattern 54.1mm ID Bore Four 6.2mm ID Bolt Holes Equally Spaced @ 90 Degrees 65mm Bolt Circle Diameter

37 Tooth Rear Wheel Wheel Sprocket for #428 Chain 154mm (6.06") OD48mm (1.89") ID7mm thick.8.8mm ID bolt holes.4 bolt mounting pattern. Adjacent bolt holes are spaced 48mm (1.89") apart from center to center. 68mm (2.68") bolt circle diameter (BCD).Made of yellow zinc plated steel. Compatibility: Used on some mini bike, dirt bike, pit bike, and go-kart makes and models.  ...

38 Tooth 4-Hole Freewheel Sprocket for 1/2" x 1/8" Bicycle Chain with F4 Mounting Pattern

38 Tooth Sprocket for 8mm Chain 100mm (4") OD, 54mm (2-1/8") ID. 4mm thick. 4 bolt mounting pattern. Adjacent mounting bolt holes are spaced 47mm (1-3/8") apart from center to center. F4 mounting pattern (works with 4-hole and 16-tooth freewheels). Made from steel with a zinc-plated finish.

38 Tooth Sprocket for #41 and #420 Chain Made from Aircraft Grade Tempered (Hardened) Aluminum Alloy For #41 and #420 Chain 38 Teeth F4 Mounting Pattern 54.1mm ID Bore Four 6.2mm ID Bolt Holes Equally Spaced @ 90 Degrees 65mm Bolt Circle Diameter

38 Tooth Sprocket for #41 and #420 Chain Made from Aircraft-Grade Tempered (Hardened) Aluminum Alloy For #41 and #420 Chain 38 TeethF5 Mounting Pattern 6" OD 2.125" ID 2.638" Bolt Circle Diameter Five 5.25mm ID Bolt Holes