|
|
|
|
|
|
36 Volt 1000 Watt SPD-CT660B9 Controller and THR-68 Throttle Kit (KIT-CT660B9-2)
|
|
|
36 Volt 1000 Watt SPD-CT660B9 Controller and THR-68 Throttle Kit
- We install a connector on the throttle that plugs into the controller so everything is properly wired and works together.
|
|
|
|
|
|
|
|
|
|
36 Volt 1000 Watt SPD-CT660B9 Controller and THR-86 Throttle Kit (KIT-CT660B9)
|
|
|
36 Volt 1000 Watt SPD-CT660B9 Controller and THR-86 Throttle Kit
- We install a connector on the throttle that plugs into the controller so everything is properly wired and works together.
|
|
|
|
|
|
|
|
|
|
24 Volt 250 Watt Electric Scooter or Go Kart Power Kit (KIT-101)
|
|
|
- We install matching connectors on every part of this kit and label them so all you have to do is plug everything together.
|
|
|
|
|
|
|
|
|
|
24 Volt 450 Watt Modification Kit for Razor MX350 and MX400 Dirt Bike Version 1-32 (KIT-MX24450-1)
|
|
|
24 Volt 450 Watt Modification Kit for Razor MX350 and MX400 Dirt Bike Version 1-32
- Plug and play power upgrade kit for version 1-32 MX350 and MX400 dirt bikes.
- Includes heavy-duty large double sided foam mounting tape square for the controller.
- 24 Volt 450 Watt motor has the same bolt hole pattern as the bike's original motor.
- Provides around the same top speed as the original motor with improved hill climbing ability.
- A faster top speed could be achieved with this kit if a smaller wheel sprocket was installed along with it.
|
|
|
|
|
|
|
|
|
|
24 Volt 400 Watt MAC Brushless Motor Power Kit with Thumb Throttle (KIT-170)
|
|
|
24 Volt 400 Watt MAC Brushless Motor Power Kit With Thumb Throttle (KIT-170)
|
|
|
|
|
|
|
|
|
|
24 Volt 500 Watt Electric Scooter or Bar Stool Racer Power Kit (KIT-105)
|
|
|
- We install matching connectors on every part of this kit and label them so all you have to do is plug everything together.
|
|
|
|
|
|
|
|
|
|
24 Volt 500 Watt Electric Scooter Power Kit (KIT-125)
|
|
|
- We install matching connectors on every part of this kit and label them so all you have to do is plug everything together.
|
|
|
|
|
|
|
|
|
|
24 Volt 500 Watt Electric Scooter Power Kit (KIT-126)
|
|
|
24 Volt 500 Watt Electric Scooter Power Kit
- Same as KIT-125 except the motor has a mounting base.
- We install matching connectors on every part of this kit and label them so all you have to do is plug everything together.
|
|
|
|
|
|
|
|
|
|
24 Volt 400 Watt Brushless Motor Power Kit with Twist Throttle (KIT-175)
|
|
|
24 Volt 400 Watt MAC Brushless Motor Power Kit with Twist Throttle (KIT-175)
|
|
|
|
|
|
|
|
|
|
24 Volt 750 Watt XYD-6B Motor, 24 Volt 1000 Watt Controller, and Twist Throttle Kit (KIT-605)
|
|
|
24 Volt 750 Watt XYD-6B Motor, 24 Volt 1000 Watt Controller, and Twist Throttle Kit
- We install matching connectors on every part of this kit and label them so installation will be plug-and-play.
- The $35.00 kit labor fee is waived so this kit costs the same as buying all of the parts individually.
|
|
|
|
|
|
|
|
|
|
36 Volt 1000 Watt Kit (KIT-361000-27-NM)
|
|
|
$221.45 of parts and labor for 199.31 (10% kit discount).
|
|
|
|
|
|
|
|
|
|
24 Volt 250 Watt Electric Scooter or Go Kart Power Kit (KIT-102)
|
|
|
- We install matching connectors on every part of this kit and label them so all you have to do is plug everything together.
|
|
|
|
|
|
|
|
|
|
24 Volt 250 Watt Electric Go Kart Power Kit (KIT-103)
|
|
|
- This kit includes $261.50 of parts and labor for only $200.00.
- We install matching connectors on every part of this kit and label them so all you have to do is plug everything together.
|
|
|
|
|
|
|
|
|
|
24 Volt 500 Watt Razor Ground Force and Ground Force Drifter Modification Kit (KIT-24320-NB)
|
|
|
This kit includes $223.65 of parts and labor for $201.29 (10% discount).
- Throttle to Controller wire length 48"
- Battery Pack to Controller wire length 24"
- Charger Port Adapter to Controller wire length 24"
- Motor to Controller wire length 18"
The original power switch, battery charger, and charger port are reused with this kit.
The chain with master link in this kit is oversized and will need to be shortened to the correct length after the motor is installed.
This is a modification parts kit and requires custom installation.
|
|
|
|
|
|
|
|
|
|
36 Volt 750 Watt Electric Locomotive Power Kit (KIT-189)
|
|
|
- With this kit you get $229.70 of parts and $35.00 of labor for $205.00.
|
|
|
|
|
|
|
|
|
|
24 Volt 350 Watt Electric Go Kart Power Kit (KIT-2301)
|
|
|
- $240.00 of parts and labor for $205.00.
|
|
|
|
|
|
|
|
|
|
24 Volt 500 Watt Razor Ground Force and Ground Force Drifter Modification Kit with Reverse (KIT-24325-NB)
|
|
|
Warning: The go-kart needs to be at a complete stop before switching from forward to reverse or from reverse to forward. If the direction is switched while the go-kart is moving then the speed controller will stop working. There is no warranty on the speed controller so if this happens then it will need to be replaced at your expense. For this reason, we do not recommend this kit for children to use. For children, we recommend our 24 Volt 500 Watt kit without reverse, our 36 Volt 1000 Watt kit with reverse, or our 48 Volt 1000 Watt kit with reverse. Our 1000 Watt kits with reverse have a heavy duty external reverse relay which stops the motor between forward and reverse to prevent damage to the controller if the direction is changed when the go-kart is in motion.
This kit includes $249.55 of parts and labor for $224.59 (10% discount).
- Toggle Switches to Controller wire length 48"
- Throttle to Controller wire length 48"
- Battery Pack to Controller wire length 24"
- Charger Port to Controller wire length 24"
- Motor to Controller wire length 18"
The original power switch and charger port are reused with this kit.
The toggle switch (used for forward/reverse) has 48" of wire so it can be mounted on the front of the go kart if wanted. This wire length can be shortened on request.
The chain with master link in this kit is oversized and will need to be shortened to the correct length after the motor is installed.
This is a modification parts kit and requires custom installation of all parts.
|
|
|
|
|
|
|
|
|
|
24 Volt 350 Watt Electric Beach Cart Power Kit with Reverse (KIT-145-2-B)
|
|
|
- $262.60 of parts and labor for $236.34. (10% kit discount)
- The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request.
|
|
|
|
|
|
|
|
|
|
24 Volt 500 Watt Electric Scooter or Bar Stool Racer Power Kit with Batteries and Charger (KIT-106)
|
|
|
- We install matching connectors on every part of this kit and label them so all you have to do is plug everything together.
|
|
|
|
|
|
|
|
|
|
24 Volt 250 Watt Electric Go Kart Power Kit (KIT-131)
|
|
|
Axle sprockets and hubs which are compatible with this kit's motor sprocket and chain are available on these pages:
|
|
|
|
|
|
|
|
|
|
24 Volt 450 Watt Electric Beach Wagon Power Kit (KIT-135)
|
|
|
Kit Includes:
- 44 tooth sprocket for 1/2" x 1/8" chain with 3/4" ID hub (hub has 3/16" key way and two set screws)
- 24 Volt 450 Watt 550 RPM gear motor with 9 tooth sprocket for 1/2" x 1/8" chain
- 72 Links of 1/2" x 1/8" chain with master link
- 24 Volt 500 Watt speed controller with reverse
- Thumb throttle with 24 Volt battery gauge and red push button switch for reverse
- Key switch with two keys
- Matching connectors installed and labeled on all parts and kit fully bench tested
- Kit includes $291.68 of parts and labor for $249.95
|
|
|
|
|
|
|
|
|
|
24 Volt 500 Watt Electric Scooter Power Kit with Batteries and Charger (KIT-130)
|
|
|
- We install matching connectors on every part of this kit and label them so all you have to do is plug everything together.
|
|
|
|
|
|
|
|
|
|
24 Volt 350 Watt Electric Beach Cart Power Kit with Reverse (KIT-145-1)
|
|
|
- With this kit you get $281.55 of parts and labor for $253.40 (10% discount).
- The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request.
|
|
|
|
|
|
|
|
|
|
24 Volt 350 Watt Electric Beach Cart Power Kit with Reverse (KIT-145-2)
|
|
|
- The SWT-23 handlebar mount switch with red button is wired as the reverse switch, and the red button switch on the throttle is wired as the on/off main power switch. These functions of these switches could be changed upon request.
|
|
|
|
|
|
|
|
|
|
24 Volt 250 Watt Electric Scooter Power Kit (KIT-24250-20)
|
|
|
Wire Routing Chart 
- $304.45 of parts and labor for $274.00 (10% kit discount).
- Select chain options and wire lengths options of the kit above.
|
|
|
|
